Most effective video. Welcome back. In this video, you'll learn how to insert tabs in particular, walk through four different types of tabs.
First one will be a right tab straggler one at four and a half inches movements for the right tab with adult leader or a half inches.
Then we'll insert a right tab at one inch left hand at 1.2 and notice how the cons are going to line up perfectly and
The last one is going to be a decimal tab. In this case, notice how all the information lines up perfectly.
On the tabs and finally the last step is I say it, one way to put this border all the way around the outside. Well, now that we know what we want to create. So let's go ahead and get started.
So the first step is I'm going to come along and open up Microsoft Word is on the star icon and Microsoft Word. I'll go ahead and choose a like talking with them.
Okay, I'm gonna get just a little bit larger font size. So they've got hit control. A to select all, and I'll go with a 20 point here.
Okay, so the first thing I'm doing is I'm attempt an example one
Right tab at 4.5 inches.
Okay, I'm not going to set the
North office.
And I'm going to be setting my TAB. NEXT my ruler is currently visible. Let's assume years was not. I'm just going to come to a view.
And I can turn off the ruler or in this case and press on you and turn it on, so it can the person who went to his credit right tab at four and a half inches.
Right now I've got this set to a lifetime, not just going to keep pressing it until I get to write tab and I'm just going to go to about four and a half inches and I'll press on the rule and I created that little town. So at this point I can just press the Tab key.
Type it over and watch has it back fills in the types and Mary Smith, I can now go ahead and type in South office.
Close the Tab key know type and john Walker and, again, notice how that information is perfectly one
I'm looking here. I'm kind of noticing how its put little extra space in there. You can just select your entire document. Just sit out of control. If you want
I'll come back here to the Home tab press on the line spacing compared to the line spacing options to change this to zero.
Single and press okay maybe I will post the hard return for zero key right after them. Okay, so the first one is finished. I'm not going to hit the enter key. A few times. I'm going to come up here and I'm an instructor and see if I take a look here.
There is a border going across.
So it's going to come right up here, press on home and I'll insert I could do a top Warner or bottom border. It doesn't really matter. Okay, the second example, example number two. It's going to be a right tab with a dot leader at 4.5 inches again.
Yeah, I'll type in chapter one. So again, I've already gotten this case, I've got this set to a right tackle. I want to delete it, which I'm going to really put my cursor right on it and drag it down some press and dry and click it off some into that one semi have one at
A three and a half. I'm just going to press on track it down and that will be wasted. So in this case,
Again to one over don't write tab, with all the identify all my current show up here. It's going to give you feedback. Shut up. That's right, tab.
On the go ahead, press that four and a half inches. Now I'm going to do is double click on this and on and do is change the leader to know from nine to two
And I can hit sets and okay now I want to press the Tab key on the keyboard and I'll type of on like page one. And I'll talk about chapter to oppress the Tab key and watch unit back with some really big page number how they're going to line up.
A little bit on the right term. Okay, moving on. Example number 3% a right
One inch
And love tab.
And thought about one one and at 1.1 or 1.2 inches them.
I'll try and keep those somewhat close. Okay. So we already got the right tab I can go ahead and turn that one off.
OK, OK, I'm going to position my cursor right here and I want to write tab at one inch. So it's that to write tab I can just go ahead, press right on the one I've got my right to them now ready to do is get a left. So I'm just going to keep pressing this
Until I get to the left tab and I'm just gonna press. Just one little doorway, like a 10th of an inch right there. So I gotta write down one love tab.
Right beside that okay I'll come on down below website but two clips. First of all, I'm going to press the Tab key created that thing. I'm excited to colon from the press TAB key again. Mary Smith, press the Tab key. I'm calling us the Tab key again john Walker you repeat that.
Subject colon and exams. So notice how perfectly aligned those cones are this because we get there right tab at one inch. And we'll have to have at 1.1. Okay, let's go ahead and insert either a top mortar or bottom border there just create a little
Break. So we let them come on down here and delete. So example. One example to and now move on to example for
This little tab had one inch.
Okay. So at this point I'm going to go ahead and actually I don't even have a new tabs to remove. I'm gonna go ahead and keep pressing on that.
So I get to the decimal point in there it is. It's got that little bitty diet. I can see it's a decimal point, I'm gonna go ahead and press one it out one inches plus on the one I've got the decimal point. So this part I'm going to press the Tab key. The top 3.23
Cluster TAB key again 12.56 and 345 hundred with Carolyn. These numbers are. But you're going to see that.
How perfectly. Those things are aligned on the decimal and if you try to do that by hand, inevitably,
The space. It's going to be a little too much, a little bit. Not enough and you're going to try and be kind of going back and forth with the arrow keys and the spacebar, but you still probably won't get a perfectly aligned unless that go ahead and give a little break right here.
Okay. Last step where you to do is put this big box around the outside. To do that, I'm going to first of all, I can see them zoomed in that 100%
I'm going to zoom out just a little bit so I can clearly see everything. And there's a lot of ways to create this box. I'm just going to go ahead and insert a big old rectangle
It's going to press on insert shapes and under basic the rectangles. Third, first one who's going to create a rectangle
Okay, and that's just going to put a big rectangle on top of everything. Well, it's covered it up. I, no problem. We can just saw right click on it to the format shape. Go to fill
Know, Phil and I can go to line if you change the color. If I wanted to increase the thickness of the upline or on the outside.
Which fine. Maybe once I'm done here. I could zoom back to 100% well this video, have you learned about tab. So we started off just a regular right tab, then we have most adult leader.
And we said two tabs, we get these icons perfectly line and the decimal point to get those numbers all perfectly line on the decimal point them. Well, I hope you enjoyed this video kitchen. Excellent. Thanks. Bye.